Home Distributors/Dealers Case Drawing Products Specials Brochure Order Support Contact Us Join Mail List

CruzPro EH60
Digital Engine Hours & Elapsed Time Gauge with Maintenance Alarm

Download EH60 Users Manual PDF

EH60 Full Featured Engine Hours Gauge. Choice of square or round bezel

Square EH60S EH60 Digital Engine Hours and Elapsed Time Gauge with Maintenance Alarm

Round EH60R EH60 Digital Engine Hours and Elapsed Time Gauge with Maintenance Alarm

CE Certified for Europe

CE Certified

Waterproof front case

Specifications

Operating Voltage:
9.5 - 33.0 VDC

Current Drain:
0.018 amps nominal

Display:
4 digit LCD, 5 levels of backlighting

Data:
Engine Hours (0.0-9999), Elapsed Time (00:00 mins/sec to 99:59 hrs/mins)

Inputs:
External Backlight ON/OFF control

Data Ouput:
NMEA 0183 serial 4800 BAUD

Alarms:
Built-in 85 dB audible settable maintenance alarm

Size:
2.5" dia X 4.1" deep (61mm x 104mm)

Mounting:
2-1/8" (55mm) round hole

EH60

The EH60 is a full featured Engine Hours and Elapsed Trip Time gauge which displays total engine hours and elapsed trip time from 000.0 hours to 9999 hours. A built-in engine hours countdown alarm can be set to warn you to perform needed maintenance such as changing the engine oil or oil filters. When activated the built-in alarm will sound and the display will flash.

The total engine hours can be preset for retrofit to older existing engines. Five levels of backlighting can be selected from the front panel, including OFF and the backlights can be deactivated with a remote switch. All calibration and alarm values are saved to a nonvolatile memory. The EH60 is easy to install with a minimum of only two wires connected to the ignition line and ground.

All constants and calibrations are pre-set during manufacture but you may alter these settings to suit your particular needs. All calibrations and settings are saved to a non-volatile memory that works without power for ten years.

With a press of the button you can display either Total Engine Hours or Elapsed Trip Time.

An engine maintenance alarm can be set using the front panel switches and it will remind you when its time to change the oil, check water levels, etc..

The EH60 draws only 0.018 amps and 5 levels of backlight (including OFF) can be selected from the front panel and is saved to non-volatile memory.

The EH60 outputs Total Engine Hours, and Elapsed Time on the standard NMEA 0183 serial data line at 4800 BAUD. This ASCII information can be used to log performance or repeat the display information at a remote location on the CruzPro RP60 and/or RP110 data repeaters (see www.cruzpro.com/rp60.html, www.cruzpro.com/rp110.html and www.cruzpro.com/maxrp110.html).



EH60 Connection Diagram


EH60 Connection Diagram



Home Distributors/Dealers Case Drawing Products Specials Brochure Order Support Contact Us Join Mail List